Flow Down Underbody Lighting 2.0 Rainbow Kit
Flow Down Underbody Lighting 2.0 Rainbow Kit
Flow Down Underbody Lighting 2.0 Rainbow Kit
Flow Down Underbody Lighting 2.0 Rainbow Kit
Flow Down Underbody Lighting 2.0 Rainbow Kit
Flow Down Underbody Lighting 2.0 Rainbow Kit
Flow Down Underbody Lighting 2.0 Rainbow Kit

Flow Down

Flow Down Underbody Lighting 2.0 Rainbow Kit

Sale price$277.74 USD
Quantity:
Pickup available at Flow Down Usually ready in 2-4 days

Flow Down Underbody Lighting 2.0 Rainbow Kit

Flow Down

Pickup available, usually ready in 2-4 days

Hermann-Drescher-Weg 6E
45329 Essen
Germany

+4917676043407

Next Generation 2.0! 🔥

The brightest underbody lighting on the market!

Delivery from around week 7

Next version of our Showtime Kit!

  • 200% brighter than the 1.0
  • Stronger LED chips
  • over 250 flow color effects
  • Aluminum connector between the LED strips
  • Improved LED controller
  • With radio remote control
  • Also visible during the day!
You can easily control the underbody lighting using an app on your smartphone.
With over 250 flow effects and a huge color palette, you have a free choice of colors.
Special features of the color gradient underbody lighting 2.0:
  • choose between a color or that  Color tracking mode
  • > 250 different pre-built color tracking modes
  • 13 million solid colors + tracking mode
  • Music synchronization and flash lighting
  • Color change between 1 and 64 colors
  • App Control (supported on all IOS/Android devices)
  • Quick and easy installation thanks to attached 3M adhesive strips
  • Connection directly to the battery or ignition
The underbody lighting contains:

1 x main controller with connection cable and app control
2 x weatherproof LED underbody lighting (180 cm)
4 x weatherproof LED underbody lighting (90cm)

For installation :

  1. Clean properly before assembly and then degrease
  2. Installation of the lighting at a minimum outside temperature of 15 degrees
  3. Mount the LED strips with the 3M adhesive tape
  4. (It is recommended to use the included brackets and screws)
  5. At temperatures below 15 degrees you must use a hot air dryer, otherwise the adhesive will not have full adhesive strength.
  • No Approval in the STVO
  • Use and install at your own risk, no liability for consequential damage to the vehicle.
  • Install the lighting at a minimum outside temperature of 15 degrees
  • For safety, attach the included screws and clamps